Eaton Carter Model 60554 Hydrant Pit Valve 4th Edition EI 1584 60554Y

New spare. The buyer pays the shipping.

Eaton Carter

Hydrant Pit Valve 4th Edition EI 1584

Model 60554

60554Y – (Dual Operation) Right Hand Quick Release Lanyard with simple valve connector to be used with air or fuel operated 64230 and/or 64280 Remote Pilot Actuators. Capable of bi-directional flow.

Eaton’s Carter Model 60554 Hydrant Pit Valve is a family of valves that includes lanyard, air or dual air/lanyard operated pilot valves, with available defueling option.
60554 Hydrant Pit valves meet all the requirements of 4th Edition EI 1584, including the breakaway and
strength requirements.
The basic hydrant pit valve consists of three basic parts, lower valve assembly, upper valve assembly (or API outlet adapter) and a pilot valve. The lower valve assembly contains an isolation valve which will allow the removal and servicing of the upper valve assembly and the pilot valve assembly while the pit valve is still installed. (See service manual SM60554 for proper instructions). The upper valve portion of the 60554 is furnished with a replaceable 4” API outlet adapter on standard configurations and most upper valve options. This minimizes replacement parts and allows for easy replacement of outlet wearing surfaces.
Model 60554 Hydrant Pit Valve is designed with soft closing features to minimize the propagation of surge into the upstream piping system during closure of the valve.
Features
•Standard aluminum two-piece upper half standard, replaceable stainless steel 4” API outlet adapter.
•Stainless uppers with replaceable 4” API outlet adapter optional.
•Standard inlet flange mates with 4-inch 150 lb. ANSI flange.
•Non-adjustable closing time is 2-5 seconds.
•Optional Pilotless Valve reduces maintenance costs. Lanyard, air, or dual air/lanyard operated pilot valves available (for small or large pit applications).
•Servicing valve provides means to remove the upper valve assembly and pilot valve assembly with the unit still installed.
•Dual pilot adds true deadman backup to coupler, same as air operated pilot. Hydrant valve is automatically closed at the end of the refueling operation.
•All seals are field replaceable.
•Large pressure equalizing valve in the outlet poppet.
•Defueling capability optional with any air or dual air/lanyard operated pilot.
•Ductile iron main valve body epoxy coated for corrosion protection.
•Main piston well guided to minimize piston seal wear.
•10 or 20-mesh screen options available.

Model Descriptions
There are six basic hydrant pit valve and pilot option combinations to which various modifications may be added by inclusion of option letters as shown in the table below. The six basic combinations are as follows:
• 60554D - Lanyard operated pilot valve for manual on/off control. Valve allows flow in the fueling direction only.
• 60554V – Air or fuel operated pilot valve for deadman control. Capable of bi-directional flow.
• 60554X – Simple valve connector to be used with air or fuel operated 64230 and/or 64280 Remote Pilot Valve Actuators. Capable of bi-directional flow.
• 60554Y – (Dual Operation) Right Hand Quick Release Lanyard with simple valve connector to be used with air or fuel operated 64230 and/or 64280 Remote Pilot Actuators. Capable of bi-directional flow.
• 60554Y1 – (Dual Operation) Left hand quick release lanyard with simple valve connector to be used with air or fuel operated 64230 and/or 64280 Remote Pilot Actuators. Capable of bi-directional flow.
• 60554Z – (Dual Operation) Air operated pilot valve with
Lanyard override for manual on/off control. Capable of Bi-directional flow.