Welcome to 100outlets Online Store!
Company Location
Track Your Order
USD
Search
Advanced Search
My Cart
  Hotline: 86-21-5955-6770

ORIENTAL MOTOR Stepper Motor with Absolute Mechanical Encoder AZM46AC-HS100

SKU
DG180926-010
$710.00
In stock
Only 1 left
DG180926-010 G0-7B
Categories: Default Category, Industy & Technologies

Item # AZM46AC-HS100, 1.65 in. (42mm) Stepper Motor with Absolute Mechanical Encoder

The AlphaStep AZ Series stepper motor offers closed loop control, substantially reduces heat generation from the motor and by incorporating the newly developed Absolute Mechanical Encoder, absolute-type positioning is available, without battery back up or external sensors to buy.

  • Requires AlphaStep AZ Series Driver


*Connection Cables required (sold separately)

Product Line

 Oriental Motor ®

Frame Size

 1.65 in42 mm

Motor Length

 4.02 in.102 mm

Driver Voltage Input Power

 AC

Speed-Torque Characteristics
Loading zoom

Speed - Torque Characteristics

Holding Torque

 708 oz-in5 N·m

Type

 Absolute Mechanical Encoder

Shaft/Gear Type

 Harmonic Gear

Gear Ratio (X:1)

 100 :1

Lost Motion

 1.5 arc min or less

Shaft

 Single

Electromagnetic Brake

 Not Equipped

Resolution (Resolution Setting: 1000 P/R)

 0.0036 °/Pulse

Permissible Speed Range (r/min)

 0 ~ 35

Rotor Inertia

 0.39 oz-in²72×10-7 kg·m²

RoHS Compliant

 These products do not contain substances that exceed the regulation values in the RoHS Directive.

Safety Standards

 UL CE

CE Marking

 -ow Voltage Directives EMC Directives

Insulation Class

 Class B [130°C (266°F)]
[Recognized as 105 (A) by UL.]

Insulation Resistance

 100 MΩ or more when 500 VDC megger is applied between the following places:
Case - Motor and sensor windings

Dielectric Strength

 Sufficient to withstand the following for 1 minute:
Case - Motor and sensor windings 1.5 kVAC 50 Hz or 60 Hz

Ambient Temperature

 0 ~ 40°C (32 ~ 104°F) (non-freezing)

Ambient Humidity

 85% or less (non-condensing)

Degree of Protection

 IP66 (excluding the mounting surface and connector)

Shaft Runout

 0.05 mm (0.002 in.) T.I.R.

Concentricity

 0.075 mm (0.003 in.) T.I.R.

Perpendicularity

 0.075 mm (0.003 in.) T.I.R.

Permissible Overhung Load

 0 in. from Shaft End = 40 lb0.2 in. from Shaft End = 49 lb0.39 in. from Shaft End = 60 lb0.59 in. from Shaft End = 81 lb0.79 in. from Shaft End = 114 lb0 mm from Shaft End = 180 N5 mm from Shaft End = 220 N10 mm from Shaft End = 270 N15 mm from Shaft End = 360 N20 mm from Shaft End = 510 N

Permissible Axial Load

 49 lb

Picture is from real stock.
New and Good physical condition.
Please contact us for more information or pictures.
Pick-up is welcome.

SKU DG180926-010

No Other Seller Selling this Product